| Brand: | OMRON | Model: | R88D-KN15H-ECT-L |
| Origion: | Japan |
| High Light: | ac servo motor , electric servo motor |
1500W R88D-KN15H-ECT-L OMRON AC Servo Motor the current consumption of other controllers
Maximum Input Current:
The Servo Drive's maximum momentary output is approximately three times the rated output, and
can be output for up to three seconds.
Therefore, select no-fuse breakers with an operating time of at least five seconds at 300% of the
rated current. General-purpose and low-speed no-fuse breakers are generally suitable.
Select a no-fuse-breaker with a rated current greater than the total effective load current of all the
Servomotors. The rated current of the power supply input for each Servomotor is provided in Main
Circuit and Servomotor Connector Specifications .
Add the current consumption of other controllers, and any other components, when selecting the
NFB.
Inrush Current:
The following table lists the Servo Drive inrush currents.
With low-speed no-fuse breakers, an inrush current 10 times the rated current can flow for
0.02 second.
When multiple Servo Drives are turned ON simultaneously, select a no-fuse-breaker with a 20-ms
allowable current that is greater than the total inrush current, shown in the following table.
Leakage Breakers
Select leakage breakers designed for protection against grounding faults.
Because switching takes place inside the Servo Drives, high-frequency current leaks from the
switching elements of the Servo Drive, the armature of the motor, and the cables.
High-frequency breakers with surge withstand capability do not detect high-frequency current,
preventing the breaker from operating with high-frequency leakage current.
When using a general-purpose leakage breaker, use three times the sum of the leakage current
given in the following table as a reference value.
When selecting leakage breakers, remember to add the leakage current from devices other than
the Servomotor, such as machines using a switching power supply, noise filters, inverters, and so
on. To prevent malfunction due to inrush current, we recommend using a leakage breaker of ten
times the total of all current values.
The leakage breaker is activated at 50% of the rated current. Allow leeway when selecting a
leakage breaker.
For details on leakage breakers, refer to the manufacturer’s catalog.
The following table shows the Servomotor leakage current for each Servo Drive model.
Surge Absorbers
Use surge absorbers to absorb lightning surge voltage and abnormal voltage from power supply
input lines.
When selecting surge absorbers, take into account the varistor voltage, the allowable surge
current and the energy.
For 200-VAC systems, use surge absorbers with a varistor voltage of 620 V.
The surge absorbers shown in the following table are recommended.
AC Servo Drives
Linear Motor with built-in EtherCAT communications
| Specifications | Model |
| Power Model Supply Voltage | Applicable Servomotor Capacity |
Single-phase
100 VAC | 100 W | R88D-KN01L-ECT-L |
| 200 W | R88D-KN02L-ECT-L |
| 400 W | R88D-KN04L-ECT-L |
Single-phase/three-phase
200 VAC | 100 W | R88D-KN01H-ECT-L |
| 200 W | R88D-KN02H-ECT-L |
| 400 W | R88D-KN04H-ECT-L |
| 750 W | R88D-KN08H-ECT-L |
| 1 kW | R88D-KN10H-ECT-L |
| 1.5 kW | R88D-KN15H-ECT-L |
Three-phase
400 VAC | 600 W | R88D-KN06F-ECT-L |
| 1 kW | R88D-KN10F-ECT-L |
| 1.5 kW | R88D-KN15F-ECT-L |
| 2 kW | R88D-KN20F-ECT-L |
| 3 kW | R88D-KN30F-ECT-L |
Linear Motors
＜Iron-core motor type＞
Motor Coil Unit
| Motor Coil Unit model | Continuous force [N] | Momentary maximum force [N] |
| R88L-EC-FW-0303-ANPC | 48 | 105 |
| R88L-EC-FW-0306-ANPC | 96 | 210 |
| R88L-EC-FW-0606-ANPC | 160 | 400 |
| R88L-EC-FW-0609-ANPC | 240 | 600 |
| R88L-EC-FW-0612-ANPC | 320 | 800 |
| R88L-EC-FW-1112-ANPC | 608 | 1600 |
| R88L-EC-FW-1115-ANPC | 760 | 2000 |
Magnet Trac
| Magnet Trac model | Magnet Trac Unit Length (mm) |
| R88L-EC-FM-03096-A | 96 |
| R88L-EC-FM-03144-A | 144 |
| R88L-EC-FM-03384-A | 384 |
| R88L-EC-FM-06192-A | 192 |
| R88L-EC-FM-06288-A | 288 |
| R88L-EC-FM-11192-A | 192 |
| R88L-EC-FM-11288-A | 288 |
Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping:
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.
All shipments are fully insured.
Our advantage Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack
