SGDV-R90A11B002000 Yaskawa single phase cont. input servopack module

Detailed data :

SGDV-R90A11B002000 Yaskawa Single Phase Cont. Input Servopack Module

Brand: Yaskawa

Product Name: Servo Driver MECHATROLINK - II Communication Command Type

Model: SGDV-R90A11B002000

∑ - v series servo unit SGDV type.

Large applicable motor capacity: 0.1kw.

Power supply voltage: three-phase AC200V.

Design sequence: B-type

Interface: MECHATROLINK - II communication command type (for rotating synchronous motors).

Optional (hardware): Painting treatment.

Realize real-time communication,

With a large transmission speed of 10Mbps and a configurable communication cycle of 250us~4ms,

Realized high-speed control of more than 30 stations, and achieved high-speed communication speed,

It can send and receive various control information in real-time.

High energy-saving benefits.

Multiple communication lines can connect up to 30 stations, greatly reducing wiring costs and time,

Only one command connector is required for the upper controller,

And the cloudless speed/torque command uses a D/A converter or position command uses a pulse generator

Realized motion control.

In addition to torque, position, and speed control, it can also achieve high-precision synchronous phase control.

Due to the ability to switch control modes online, complex mechanical actions can be achieved more effectively and smoothly

Z-V series same server motor SGMJV type

Rated output: 0.2kw (200W).

Power supply voltage: AC200V

Serial encoder: 20 bit incremental type (standard).

Design sequence: standard

Shaft end: straight shaft, without keyway (standard) Yaskawa SGDV-R90A11B002000

Optional: With oil seal and holding brake (DC24V).

Medium inertia.

Instantaneous high torque (rated ratio 350%) SGDV-R90A11B002000

Equipped with a high-resolution serial encoder (13/20 bit).

High speed up to 6000r/min

Complete variety (50-750W, with holding brake).

Usage examples

Semiconductor manufacturing equipment,

Mounter,

Printed circuit board Hole punch,

Robots,

Handling machinery,

Food processing machinery.

Rating and specifications:

Rated time: Continuous Yaskawa SGDV-R90A11B002000

Vibration level: V15.

Edge resistance: DC500V, above 10M Ω,

Operating environment temperature: 0-40 ° C.

Excitation method: permanent magnet type.

Installation method: flange type.

Heat resistance grade: B

Edge withstand voltage: AC1500V1 for 1 minute.

Protection method: fully enclosed self cooling IP65 (excluding the shaft penetration part).

Operating environment humidity: 20-80% (no condensation allowed).

Connection method: directly connect to Yaskawa SGDV-R90A11B002000

Rotation direction: When viewed from the negative cutting side under the forward rotation command, it rotates counterclockwise (CCW). Servo motor SGMPH type (speed:

3000r/min).

Power: 0.1kw

Power supply voltage: single-phase AC200V.

Serial encoder: 16 bit relative value.

Design sequence: A

Shaft end: straight shaft with screw hole.

Option: With oil seal.

Partial series: When installing a servo motor in a narrow space, the Yaskawa Tongfu driver MECHATROLINK - II communication command type is required.

Flexibly adapt to user systems.

In order for you to build an excellent system and support you with a substantial product line.

The products include single-phase 100V, single-phase 200V, and three-phase 200V,

And there are various motors suitable for counter value code discs, with brakes and reducers

Furthermore, due to its compliance with international standards, it can be used with confidence throughout the range.

Smooth operation, with seasonal speed observation and control,

This greatly reduces the speed fluctuation of the motor and allows smooth operation of the Yaskawa servo driver MECHATROLINK - II communication command type at low speeds. Z-V

SGMJV series servo motor.

Rated output: 0.15kw (150W).

Power supply voltage: AC200V

Serial encoder: 20 bit pair value (standard).

Design Item: Standard,

Shaft end: straight shaft, without keyway (standard) Yaskawa servo driver MECHATROLINK - II communication command type

Optional: With oil seal.

Medium inertia

Instantaneous high torque (rated ratio 350%).

Equipped with a high-resolution serial encoder (13/20 bit),

High speed up to 6000r/min.

Complete variety (50-750W, with holding brake).

Usage example:

Semiconductor manufacturing equipment,

Mounter,

Printed circuit board Hole punch,

Robots,

Handling machinery,

Food processing machinery.

Rating and specifications:

Rated time: continuous.

Vibration level: V15.

Edge resistance: DC500V, above 10M Ω,

Three degrees of use environment: 0~40 ° C

Excitation mode: permanent magnet SGDV-R90A11B002000.

Installation method: flange type.

Heat resistance grade: B

Edge withstand voltage: AC1500V1 minute Yaskawa SGDV-R90A11B002000

Protection method: fully enclosed self cooling IP65 (excluding the shaft penetration part).

Operating environment humidity: 20-80% (no condensation allowed).

Connection method: Direct connection.

Rotation direction: When viewed from the load side under the forward rotation command, it is counterclockwise (CCW) travel rotation.

Condition:

A brand-new, unused, unopened, undamaged item in its original packaging (where
packaging is applicable). Packaging should be the same as what is found in a
retail store, unless the item is handmade or was packaged by the manufacturer
in non-retail packaging, such as an unprinted box or plastic bag. See the
seller's listing for full details.

Terms:

We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.

All shipments are fully insured.

Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack