Mitsubishi MR-J4-200B servo driver analog input/output module PLC brand new

Brand: Mitsubishi
Product name: SSCNET interface servo amplifier
Model: MR-J2S-200B
Mitsubishi universal AC servo amplifier MELSERVO-J2 Super series.
Rated output: 2.0kw.
SSCNET interface.
Voltage: 3-phase AC200VAC or single-phase AC230V
A fully synchronized system using SSCNET high-speed serial communication,
The communication cycle time between the controller and the servo amplifier is 0.888ms.
This system will provide high reliability and.
When connecting the servo system with SSCNET,
The servo amplifier parameter settings and data acquisition characteristics in the motion system will be displayed on the motion controller.
Connect a dedicated cable to the amplifier and controller to form the SSCNET system.
This simple connection method reduces wiring time and helps prevent noise.
Even when using high-resolution encoding standards on MELSERVO-J2 SUPER series products, there is no limit to the frequency of commands.
Simply install a battery on the servo amplifier to form a control system.
There are currently 1000000 highly reliable SSCNET servo amplifier networks in use.

Line length: 10M.
IP rating: IP65.
Cable lead out direction: opposite side of motor shaft.
Bending life: high bending life.
This cable is not shielded.
Encoder cable (motor side); Used for the HF-KP/HF-MP series (motor shaft led out on the same side) Mitsubishi MR-J2S-200B. Motor series: medium inertia,
Medium power.
Rated output power: 1.0kw.
Rated speed: 2000r/min
Whether equipped with brakes: without MR-J2S-200B
Axis end: Keyway (with groove position).
Protection level: IP65 (IP67).
Features: Three modes of inertia from low speed to high speed are available for selection, suitable for different application ranges.
Application examples: conveying machinery, robots, X-Y workbenches.
High resolution encoder 131072p/rev (17 bit) Mitsubishi MR-J2S-200B.
Equipped with a high-resolution encoder, it ensures excellent performance and stability at low speeds.
All motor sizes are the same as previous products and wiring is compatible.
Motor series: low inertia, medium power.
Rated output power: 22.0kw.
Rated speed: 2000r/min.
Equipped with brakes: included.
Axis end: standard (straight axis).
Protection level: IP65 (IP67).
Features: Low inertia from low speed to high speed, three modes to choose from, suitable for different application ranges of Mitsubishi MR-J2S-200B. As a standard production port, 30KW or higher power is suitable for flange (type) installation and support foot installation.
Application examples: injection molding machines, semiconductor manufacturing devices, and large conveyor machinery.
High resolution encoder 131072p/rev (17 bits).
Equipped with a high-resolution encoder, it ensures excellent performance and stability at low speeds.
All motor sizes are the same as previous products and the wiring is compatible with Mitsubishi's built-in positioning function servo amplifier. Motor series: medium inertia, medium capacity.
Use serial pair/incremental encoder.
Rated output power: 2.0kw.
Rated speed: 2000rpm.
With or without brake: with.
Axis end: straight axis.
The rotor of AC servo motors is usually made into a squirrel cage type, but in order to make the servo motor have a wide speed range, linear mechanical characteristics, no "rotation" phenomenon, and fast response performance, compared with ordinary motors, it should have two characteristics: high rotor resistance and small moment of inertia. Mitsubishi has a built-in positioning function servo amplifier.
There are currently two commonly used forms of rotor structures: one is a squirrel cage rotor made of high resistivity conductive materials with high resistivity conductive bars. In order to reduce the rotational inertia of the rotor, the rotor is made slender. Mitsubishi has a built-in positioning function servo amplifier with a 1-axis servo amplifier.
Mitsubishi universal AC servo amplifier MELSERVO-J4 series.
Rated output: 1.0kw.
Interface: SSCNET III/H.
Power supply: three-phase AC200V.
Special specifications: Full closed-loop control 4-wire/device end encoder ABZ phase input corresponding, supporting functional safety units, and supporting positioning mode.
Support SSCNET III/H servo amplifier.
Can build a fully synchronized system using high-speed serial optical communication.
Can be combined with servo system controllers to maximize the functional performance of the servo system.
By supporting seismic algorithms for three inertial devices, two low-frequency vibrations can occur simultaneously.

Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping:
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.
All shipments are fully insured.
Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack